Imaginator 3D gives you the opportunity to let your imagination run wild, but if you’d like a jumping off point, we’ve got some helpful, basic designs that you can download and use to get started!
Napkin Ring Designs
All of these prints will likely need to be printed on rafts. The best combo we have found that works REALLY WELL is to print a raft in ABS plastic with the model being printed in PLA plastic.
Christmas Ornament Designs
All of the ball ornaments will need to be printed on rafts. The good news is that since the design is thin walled the raft will snap off easily! If you have problems with drips you may need to drop your extrusion temp down as low as possible. Also, depending on the type/color of plastic you use, it may be necessary to decrease/increase the scale of the ball backs for a proper fit.
Scaled Furniture Designs (1 inch = to 1 foot scale)
These can be scaled down to any size you need by using the Makerware scale function!
1/8″ = 1′ (scale to 12.5%)
1/4″ = 1′ (scale to 25%)
1/2″ = 1′ (scale to 50%)
For something a little more challenging, check out our 3D Printed FPV Quadcopter Design!