What’s in the News For 18 Feb 15?

A few articles back I mentioned a story on Graphene and how an infused filament could print electronic circuits. Well, in a step forward a group at Korea Electrotechnology Research Institute has developed a graphene oxide material which results in a pure graphene print when extruded!   The advantage of printing a pure graphene material is that […]

Continue Reading →

Print of the Week 13 Feb 15

Arm Thingy

Happy Friday!! And, do you have your weekend 3D print list prepared? If not, then I hope that one of these projects will keep you busy or tweak an idea to send you to the design board. Today I hope to bring to you at least one design you will find print worthy. Don’t forget, […]

Continue Reading →

News for 11 Feb 15

Birdhouse

Hi everyone, I hope your week is moving right along. In today’s news articles I point you toward news worthy events about newly updated software, a new 3D print community, and a birdhouse that changes color when it’s occupied! Lets briefly discuss the new Mixmesher update! If you are not familiar with this software, you should […]

Continue Reading →

Prints of the Week…6 Feb 2015

Mmmmm, Jelly Beans

Yeah!!! Another Friday is here and I hope that you have a print list lined up for the weekend. As always, I have lined up a few items I thought you might find fun or interesting as a weekend project. There is no particular theme this week or next; however, if there is a particular you would […]

Continue Reading →

News for 4 Feb 2015

Hover Board by Hendo

Welcome to the weekly news for the first week in February! This week I have found some really cool articles that will definitely tweak your interests. As we approach the anniversary of Marty McFly’s arrival date, 21 October, 2015, Hendo is fast approaching the release of their hover board. It’s not as agile as Marty’s, […]

Continue Reading →

News for 28 Jan 2015

Filament

In today’s blog I hope to bring to you a few more informative articles that will make your 3D printing experience more enjoyable. In this article we take a brief look at a filament comparison article, some new filament entering the market, and a flashlight that will last up to 20 years! 3D Printing Industry […]

Continue Reading →

Prints of The Week…23 Jan 2015

Motor

Good morning everyone and happy Friday! In this week’s design picks I have ran across two Instructable designs and one from Thingiverse. There is not a particular theme this week, however, I just thought these designs were either interesting or would be useful for you. The first design is from Thingiverse and took me back […]

Continue Reading →

Prints of the Week…FPV!

Quad

What is First Pilot Video?  Find out here. Watch recorded flights of FPV video here. Happy Friday!! Today, I want to take a special look at designs that may come in handy for FPV. First Person Video (FPV) is a new growing hobby within the Remote Control (RC) community whereby you place a small camera […]

Continue Reading →