In Part 1 of Unclogging Jammed Extruders, I covered removing the clogged filament by heating the extruder. Now, let’s review how to remove the assembly to check for a clog. Disassembling the Extruding Assembly If the previous procedure has not removed your jam then you likely have filament jammed in your extruder motor assembly. Removing […]
Unclogging Jammed Extruders – Part 1
There are several reasons the filament in your extruder may become jammed or fail to feed. Today, I’ll cover 3 causes I have encountered with my 3D printers. The jam most encountered on my list tends to be caused when the heating block tube (small nylon tube inside of the heating block) becomes clogged. This […]